
Precession
Jason Harris
Precession is the gradual change in the direction of the Earth’s spin axis. The spin axis traces a cone, completing a full circuit in 26,000 years. If you have ever spun a top or a dreidel, the “wobbling” rotation of the top as it spins is precession.
Because the direction of the Earth’s spin axis changes, so does the location of the Celestial Poles.
The reason for the Earth’s precession is complicated. The Earth is not a perfect sphere, it is a bit flattened, meaning the Great Circle of the equator is longer than a “meridonal” great circle that passes through the poles. Also, the Moon and Sun lie outside the Earth’s Equatorial plane. As a result, the gravitational pull of the Moon and Sun on the oblate Earth induces a slight torque in addition to a linear force. This torque on the spinning body of the Earth leads to the precessional motion.
Tip
Exercise:
Precession is easiest to see by observing the Celestial Pole. To find the pole, first switch to Equatorial Coordinates in the
Configure - KStarswindow, and then hold down the Up arrow key until the display stops scrolling. The declination displayed in the center of the Info Panel should be +90 degrees, and the bright star Polaris should be nearly at the center of the screen. Try slewing with the left and right arrow keys. Notice that the sky appears to rotate around the Pole.We will now demonstrate Precession by changing the Date to a very remote year, and observing that the location of the Celestial Pole is no longer near Polaris. Open the
Set Timewindow (Ctrl+S), and set the date to the year 8000 (currently, KStars cannot handle dates much more remote than this, but this date is sufficient for our purposes). Notice that the sky display is now centered at a point between the constellations Cygnus and Cepheus. Verify that this is actually the pole by slewing left and right: the sky rotates about this point; in the year 8000, the North celestial pole will no longer be near Polaris.
The Zenith
Jason Harris
The Zenith is the point in the sky where you are looking when you look “straight up” from the ground. More precisely, it is the point on the sky with an Altitude of +90 Degrees; it is the Pole of the Horizontal Coordinate System. Geometrically, it is the point on the Celestial Sphere intersected by a line drawn from the center of the Earth through your location on the Earth’s surface.
The Zenith is, by definition, a point along the Local Meridian.
Tip
Exercise:
You can point to the Zenith by pressing Z or by selecting the
Pointing→Zenithmenu item.
Epoch
Akarsh Simha
An epoch is a certain instant of time (usually past) used as a reference for time measurement in astronomy. In order to make calculations easier, astronomers usually use the number of days that have passed since a certain moment in time as a way of representing time in astronomical calculations. This arbitrarily chosen “starting point” reference for time is called an epoch.
An epoch is usually cited along with equatorial coordinates in astronomical catalogs, since the equatorial coordinates of sky objects change (although slowly) with time. Printed star charts / atlases are usually marked as being valid for a certain epoch.
The most popular epoch used currently is J2000.0, (the Julian year 2000.0), which (almost exactly) corresponds to 1st January 2000, 12:00 noon UTC. Other epochs include B1900 and B1950.
KStars supports catalogs based on J2000.0 and B1950.0 epochs.
Julian Day
John Cirillo
Julian Days are a way of reckoning the current date by a simple count of the number of days that have passed since some remote, arbitrary date. This number of days is called the Julian Day, abbreviated as JD. The starting point, JD=0, is January 1, 4713 BC (or -4712 January 1, since there was no year ‘0’). Julian Days are very useful because they make it easy to determine the number of days between two events by simply subtracting their Julian Day numbers. Such a calculation is difficult for the standard (Gregorian) calendar, because days are grouped into months, which contain a variable number of days, and there is the added complication of Leap Years.
Converting from the standard (Gregorian) calendar to Julian Days and vice versa is best left to a special program written to do this, such as the KStars Astrocalculator. However, for those interested, here is a simple example of a Gregorian to Julian day converter:
JD = D - 32075 + 1461*( Y + 4800 + ( M - 14 ) / 12 ) / 4 + 367*( M - 2 - ( M - 14 ) / 12 * 12 ) / 12 - 3*( ( Y + 4900 + ( M - 14 ) / 12 ) / 100 ) / 4
where D is the day (1-31), M is the Month (1-12), and Y is the year (1801-2099). Note that this formula only works for dates between 1801 and 2099. More remote dates require a more complicated transformation.
An example Julian Day is: JD 2440588, which corresponds to 1 Jan, 1970.
Julian Days can also be used to tell time; the time of day is expressed as a fraction of a full day, with 12:00 noon (not midnight) as the zero point. So, 3:00 pm on 1 Jan 1970 is JD 2440588.125 (since 3:00 pm is 3 hours since noon, and 3/24 = 0.125 day). Note that the Julian Day is always determined from Universal Time, not Local Time.
Astronomers use certain Julian Day values as important reference points, called Epochs. One widely-used epoch is called J2000; it is the Julian Day for 1 Jan, 2000 at 12:00 noon = JD 2451545.0.
Much more information on Julian Days is available on the internet. A good starting point is the U.S. Naval Observatory. If that site is not available when you read this, try searching for “Julian Day” with your favorite search engine.


0 comments:
Post a Comment